Reactive Polymer as Artificial Solid Electrolyte Interface for Stable Lithium Metal Batteries

Lithium (Li) metal anodes have the highest theoretical capacity and lowest electrochemical potential making them ideal for Li metal batteries (LMBs). However, Li dendrite formation on the anode impedes the proper discharge capacity and practical cycle life of LMBs, particularly in carbonate electrolytes. Herein, we developed a reactive alternative polymer named P(St-MaI) containing carboxylic acid and cyclic ether moieties which would in situ form artificial polymeric solid electrolyte interface (SEI) with Li. This SEI can accommodate volume changes and maintain good interfacial contact. The presence of carboxylic acid and cyclic ether pendant groups greatly contribute to the induction of uniform Li ion deposition. In addition, the presence of benzyl rings makes the polymer have a certain mechanical strength and plays a key role in inhibiting the growth of Li dendrites. As a result, the symmetric Li||Li cell with P(St-MaI)@Li layer can stably cycle for over 900 h under 1 mA cm⁻² without polarization voltage increasing, while their Li||LiFePO₄ full batteries maintain high capacity retention of 96 % after 930 cycles at 1C in carbonate electrolytes. The innovative strategy of artificial SEI is broadly applicable in designing new materials to inhibit Li dendrite growth on Li metal anodes.     

Low Concentration Sulfolane-Based Electrolyte for High Voltage Lithium Metal Batteries

Electrolyte engineering is crucial for the commercialization of lithium metal batteries. Here, lithium metal is stabilized in the highly reactive sulfolane-based electrolyte under low concentration (0.25 M) for the first time. Inorganic-polymer hybrid solid electrolyte interphase (SEI) with high ionic conductivity, low bonding with lithium and high flexibility enables dense chunky lithium deposition and high plating/stripping efficiency. Low concentration electrolyte (LCE) also enables excellent cycling stability of LiNi_0.5Co_0.2Mn_0.3O₂ (NCM523)/Li cells at 1 C (90.7 % retention after 500 cycles) and 0.3 C (83.3 % retention after 1000 cycles). With a low N/P ratio (≈2), the capacity retention for NCM523/Li cells can achieve 94.3 % after 100 cycles at 0.3 C. Exploring the LCE is of paramount significance because it provides more possibilities of the lithium salt selections, especially reviving some lithium salts that are excluded before due to their low solubility. More importantly, LCE has the significant advantage of commercialization due to its cost-effectiveness.     

Experimental and Theoretical Structure Elucidation of the [2 : 1] Complex Ion of Carbo[n]helicene with n=6, 7 and 8 and Ag+

Gas-phase complexes of [n]helicenes with n=6, 7 and 8 and the silver(I) cation are generated utilizing electrospray ionization mass spectrometry (ESI-MS). Besides the well-established [1 : 1] helicene/Ag⁺-complex in which the helicene provides a tweezer-like surrounding for the Ag⁺, there is also a [2 : 1] complex formed. Density functional theory (DFT) calculations in conjunction with energy-resolved collision-induced dissociation (ER-CID) experiments reveal that the second helicene attaches via π-π stacking to the first helicene, which is part of the pre-formed [1 : 1] tweezer complex with Ag⁺. For polycyclic aromatic hydrocarbons (PAHs) of planar structure, the [2 : 1] complex with silver(I) is typically structured as an Ag⁺-bound dimer in which the Ag⁺ would bind to both PAHs as the central metal ion (PAH–Ag⁺–PAH). For helicenes, the Ag⁺-bound dimer is of similar thermochemical stability as the π-π stacked dimer, however, it is kinetically inaccessible. Coronene (Cor) is investigated in comparison to the helicenes as an essentially planar PAH. In analogy to the π-π stacked dimer of the helicenes, the Cor−Ag⁺−Cor−Cor complex is also observed. Competition experiments using [n]helicene mixtures reveal that the tweezer complexes of Ag⁺ are preferably formed with the larger helicenes, with n=6 being entirely ignored as the host for Ag⁺ in the presence of n=7 or 8.     

Effects of Charged Surfactants on Interfacial Water Structure and Macroscopic Properties of the Air-Water Interface

Surfactants are used to control the macroscopic properties of the air-water interface. However, the link between the surfactant molecular structure and the macroscopic properties remains unclear. Using sum-frequency generation spectroscopy and molecular dynamics simulations, two ionic surfactants (dodecyl trimethylammonium bromide, DTAB, and sodium dodecyl sulphate, SDS) with the same carbon chain lengths and charge magnitude (but different signs) of head groups interact and reorient interfacial water molecules differently. DTAB forms a thicker but sparser interfacial layer than SDS. It is due to the deep penetration into the adsorption zone of Br⁻ counterions compared to smaller Na⁺ ones, and also due to the flip-flop orientation of water molecules. SDS alters two distinctive interfacial water layers into a layer where H⁺ points to the air, forming strong hydrogen bonding with the sulphate headgroup. In contrast, only weaker dipole-dipole interactions with the DTAB headgroup are formed as they reorient water molecules with H⁺ point down to the aqueous phase. Hence, with more molecules adsorbed at the interface, SDS builds up a higher interfacial pressure than DTAB, producing lower surface tension and higher foam stability at a similar bulk concentration. Our findings offer improved knowledge for understanding various processes in the industry and nature.     

Adaptive Ion-Gel: Stimuli-Responsive,and Self-Healing Ion Gels

Ion gels are an emerging class of polymer gels in which a three-dimensional polymer network swells with an ionic liquid. Ion gels have drawn considerable attention in various fields such as energy and biotechnology owing to their excellent properties including nonvolatility, nonflammability, high ionic conductivity, and high thermal and electrochemical stability. Since the first report on ion gels (published ∼30 years ago), diverse functional ion gels exhibiting impressive physicochemical properties have been reported. In this review, recent developments in functional ion gels that can modulate their physical properties in response to environmental conditions are outlined. Stimuli-responsive ion gels that can adaptively undergo phase transitions in response to thermal and light stimuli are initially discussed, followed by an evaluation of diverse self-healing ion gels that can spontaneously mend mechanical damage through judiciously designed ion-gel networks.     

Amide-Based Ionic Liquid Electrolytes for Alkali-Metal-Ion Rechargeable Batteries

Ionic liquids (ILs) have a wide variety of applications in energy storage and material production. ILs are composed of only cations and anions, without any molecular solvents, and are generally known as “designer liquids (solvents)” because their physicochemical properties can be tuned by the combination of ionic species. In recent several decades, research and development activities of rechargeable batteries have garnered considerable attention because certain groups of ILs exhibit high electrochemical stability and moderate ionic conductivity, rendering them suitable for application in high-voltage batteries. ILs with amide anions are representative electrolytes and are extensively researched by many research groups, including our group. This paper focuses on amide-based ILs as electrolytes for alkali-metal-ion rechargeable batteries, introducing their history, characteristics, and existing challenges to be addressed.     

偏硼酸锂-四硼酸锂熔融-电感耦合等离子体原子发射光谱(ICP-AES)法测定石膏中多组分含量

石膏在我国储量丰富,应用广泛,快速准确分析其成分含量对石膏资源的综合利用具有重要意义。针对酸溶法无法测定SiO2,碱熔法无法测定K2O、Na2O的问题,本文建立一种偏硼酸锂-四硼酸锂熔融-电感耦合等离子体发射光谱法同时测定石膏中CaO、SO3、Al2O3、Fe2O3、MgO、TiO2、K2O、Na2O、SiO2含量。实验优化了熔剂用量、熔融温度,结果表明采用试样与偏硼酸锂-四硼酸锂混合熔剂质量比例1：5,在铂金坩埚中1000 ℃熔融10 min,在超声条件下,于50 mL 10 %盐酸中浸取熔融物,能够有效分解试样而浸取待测组分。向标准溶液系列中加入偏硼酸锂-四硼酸锂-盐酸基体溶液以消除基体对测试结果的影响。各待测组分的校准曲线的相关性系数均大于0.9990,方法检出限在3~292 μg/g范围内;采用实验方法分别对国家一级标准物质GBW03109a、GBW03110和实际样品进行测定,标准物质的5次平行测试的相对标准偏差在0.14 %~8.86 %之间,测定结果的相对误差在0.03~8.75 %之间,测试结果与标准值无显著性差异;实际样品中各成分测定值的RSD（n=5）为0.24~8.80 %。该方法操作简单、准确度高、精密度好、检出限低,可以同时测定石膏中的多组分含量,能够为石膏资源综合利用调查评价提供一定的技术支撑 。     

Porous inorganic filler Li4.7Ag1.63GeS4.8 in PEO electrolyte effectively inhibits Li dendrites for all-solid-state Li metal batteries

The newly created porous inorganic particles Li_4.7Ag_1.63GeS_4.8 as filler are added into poly (ethylene oxide) (PEO) with LiTFSI salt, which greatly improves the electrochemical stability of solid-state PEO-based electrolytes against Li metal in a working battery. Due to many pores and channels in the filler, Li dendrites would grow along these channels thereby effectively inhibiting their fast spread in PEO matrix and retarding the short circuit on account of the penetration of Li dendrite. The Li⁺ conductivity of this solid-state electrolyte membrane could be 1.36 × 10^-4 S/cm at 40 °C. The fabricated symmetrical Li metal cells could cycle above 550 h at 0.05 mA/cm² and corresponding LiFePO₄/Li all-solid-state cells have an excellent cycling stability of 160.65 mAh g^-1 specific capacity after 200 cycles with 99.93% columbic efficiency at 50 °C environment.     

Effect of ZnO on sintering and microwave dielectric properties of 0.5CaTiO3-0.5 (Li0.5La0.5) TiO3 ceramics

The novel calcium titanate-lithium lanthanum titanate doped with zinc oxide (0.10, 0.30, and 0.50 mol. %) ceramic samples were prepared by solid-state reaction route. The phase formation, microstructure, densification, and microwave dielectric properties were investigated. It was found that the doping with zinc oxide led to a decrease in sintering temperature by 25 ^oC as compared with pure calcium titanate lithium lanthanum titanate due to the liquid phase effect. Also, the calcium titanate lithium lanthanum titanate (10ZCTLLT&30ZCTLLT)) doped with lower zinc oxide (0.10 and 0.30 mol. %) led to higher densification parameter. This was followed by increasing the zinc oxide doping up to (0.50 mol. %) which resulted in a decrease in densification and microwave dielectric properties which may be attributed to increase in porosity and grain growth upon the evaporation of zinc and oxygen vacancy. This led to the increase in dielectric loss (≈10 × 10^?4) value with 50ZCTLLT. Hence, the best result of microwave dielectric characteristics was obtained for 0.5CaTiO₃–0.5(Li_0.5La_0.5)TiO₃ with (0.10 and 0.30 mol. % ZnO) 10ZCTLLT and 30ZCTLLT ceramic samples sintered at 1175 ^oC/2h, with low dielectric constant (ε_r) = 4.4–10.5, very low dielectric loss = 1.07-2.23 × 10^?4 and high quality factor (Q x ?) ≈59-55 × 10⁴ at 8 GHz. Consequently, they can be used not only in wireless satellite communications technology but also can be used in the fifth-generation telecommunication 5G technology construction.     

Cellulose nanofibrils derived from pulp as a high performance separator for lithium-ion batteries

Cellulose nanofibrils (CNFs) from hardwood bleached kraft pulp (HwBKP) are produced via enzymatic, chemical, and mechanical treatment. A nanoporous structured CNF-based separator is produced, and the electrochemical performance, morphology, and thermal stability analyses are performed in comparison to the commercial polyethylene separator. The results obtained show that the electrolyte-philic CNF separator has capacity retention of 88.6% over 200 cycles and very good ionic conductivity and wettability results due to its high hydrophilic nature. At 140°C, the CNF separator was resilient to heat and remained intact. The CNF separator reflects high thermal resistance and good electrolyte uptake properties that are among the mandatory requirements of a separator hence, a promising contender for use in lithium-ion batteries.